HARDFACE HC333

Hersteller
Welding Alloys Group
Ceweld product
Type
High-alloyed tubular wire on a C-Cr-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.
classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-70-GRZ
Anwendungen
Rebuilding and or protecting wear parts against extreme abrasion with low impact.
Type
High-alloyed tubular wire on a C-Cr-B carbide basis for extreme hard deposits on parts subject to strong mineral abrasion.
Anwendungen
Rebuilding and or protecting wear parts against extreme abrasion with low impact.
Eigenschaften

Extreme wear resistance even at higher temperatures. The deposit gives already a High hardness in the first layer. A buffer layer is recommended in case of sensible base material or old layers. Weldable without protective gas.Corresponding electrode: Dur 62 S

Classification
EN ISO
14700: T Fe15
DIN
8555: MF 10-GF-70-GRZ
Geeignet für

64-68 HRc hardfacing alloy, Cement, Mineral mixing, hammers, coke wear plates etc.

Schweißpositionen
PA
PB
Rücktrocknung
140°C / 24 hr
Analyse
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
5 0.9 0.2 38 Rem. 2
Mechanische Gütewerte
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 67 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS