STELLITE 1 ALLOY
Hersteller
Ceweld product
Type
Cobalt-based alloy with high abrasion and corrosion resistance.
classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: S Co3
Anwendungen
Pump sleeves, expeller screws, impellors, plastic recycling, mixer blades for rubber, valves, seats etc.
Type
Cobalt-based alloy with high abrasion and corrosion resistance.
Anwendungen
Pump sleeves, expeller screws, impellors, plastic recycling, mixer blades for rubber, valves, seats etc.
Eigenschaften
Outstanding hardfacing alloy against abrasion and corrosion combined with high temperatures.
Classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: S Co3
F-nr
71
Geeignet für
Stellite 1 alloy for cladding,
Schweißpositionen
Gas acc. EN ISO 14175
I1
Mechanische Gütewerte
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 55 HRc |
Type
Cobalt-based fluxcored wire with high abrasion and corrosion resistance.
classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: T Co2
DIN
8555: MSG 20-GF-55-CTZ
Anwendungen
Pump sleeves, expeller srews, plastic recycling, mixer blades for rubber, valves, seats etc..
Type
Cobalt-based fluxcored wire with high abrasion and corrosion resistance.
Anwendungen
Pump sleeves, expeller srews, plastic recycling, mixer blades for rubber, valves, seats etc..
Eigenschaften
CEWELD AA DUR 1 deposits a cobalt-base alloy with an austenitic-ledeburitic structure. This is the hardest of the standard cobalt-base alloys. It has a high resistance to corrosion (especially to reducing acids and impact), extreme wear and temperature shocks. The alloy is only machinable by grinding. Best used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests.
Classification
AWS
A 5.21: ERCoCr-C
EN ISO
14700: T Co2
F-nr
71
DIN
8555: MSG 20-GF-55-CTZ
Geeignet für
ER CoCr-C / Co3
Stellite 1
Schweißpositionen
Gas acc. EN ISO 14175
M13
Mechanische Gütewerte
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 53 HRc |