SELECTARC FCO 307
Marque
Ceweld product
Type
High alloyed flux-cored wire for joining difficult to weld steel and buffer layers prior to hard facing.
classification
EN ISO
14700: T Fe10
Applications
Repair jobs where high strength and toughness is required.
Joining austenitic manganese steels with themselves or with other steels.
Buffer layer before hardfacing and maintenance on hard-to-weld steels.
Armour plate and Joining 14% manganese steels.
Type
High alloyed flux-cored wire for joining difficult to weld steel and buffer layers prior to hard facing.
Applications
Repair jobs where high strength and toughness is required.
Joining austenitic manganese steels with themselves or with other steels.
Buffer layer before hardfacing and maintenance on hard-to-weld steels.
Armour plate and Joining 14% manganese steels.
Propriétés
Special flux cored self shielded stainless steel wire for open arc weldingThe weld beads produced have a self-releasing slag covering that leaves a clean surfaceSound deposits are obtained even in the presence of cross draughtsPrimary choice for cladding and rebuilding application, suitable for joining and claddingProvides maximum productivity for outdoor jobs
Classification
EN ISO
14700: T Fe10
Convient pour
19% Cr / 9% Ni / 7% Mn, ISO 15608: 8.1 Cr ≤ 19 %
1.3401, 1.5637, 1.5680, 1.4370
X 20 Cr 13, X 8 Cr 17, X 22 CrNi 17, X 5 CrNi 17, G-X 20 Cr 14 mix S355
42CrMo4, C45, 42MnV7, X120Mn12, 10 Ni 14, 12 Ni 19 etc.
ASTM 307, 304, (409, 403, 405, 410, 420, 430, 440, 501, 502)
Amor, Z 120 M 12 ,
Positions de soudage
Propriétés mécaniques
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 400 HB |