Alloy 230 Tig | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Nickel based Tig filler metal for welding similar NiCrW alloys.

classification

AWS

A 5.14: ERNiCrWMo-1

EN ISO

18274: S Ni 6231(NiCr22W14Mo2)

W.Nr.

2.4733

Applications

In the chemical process industry, CEWELD® Alloy 230 is used for catalyst grid supports in ammonia burners, high-strength thermocouple protection tubes, high-temperature heat exchangers, ducts, high-temperature bellows, and various other key process internals. In the industrial heating industry, applications for 230 alloy include furnace retorts, chains and fixtures, burner flame shrouds, recuperator internals, dampers, nitriding furnace internals, heat-treating baskets, grates, trays, sparger tubes, thermocouple protection tubes, cyclone internals, and many more.

Type

Nickel based Tig filler metal for welding similar NiCrW alloys.

Applications

In the chemical process industry, CEWELD® Alloy 230 is used for catalyst grid supports in ammonia burners, high-strength thermocouple protection tubes, high-temperature heat exchangers, ducts, high-temperature bellows, and various other key process internals. In the industrial heating industry, applications for 230 alloy include furnace retorts, chains and fixtures, burner flame shrouds, recuperator internals, dampers, nitriding furnace internals, heat-treating baskets, grates, trays, sparger tubes, thermocouple protection tubes, cyclone internals, and many more.

Propriétés

CEWELD® Alloy 230 combines properties which make it ideally suited for a wide variety of component applications in the aerospace and power industries. It is used for combustion cans, transition ducts, flame holders, thermocouple sheaths, and other important gas turbine components.

Classification

AWS

A 5.14: ERNiCrWMo-1

EN ISO

18274: S Ni 6231(NiCr22W14Mo2)

F-nr

43

FM

6

W.Nr.

2.4733

Convient pour

Haynes Alloy 230, UNS N06617, AMS 5839

Positions de soudage

Etuvage

Not required

Current type:

DC-

Gas acc. EN ISO 14175

I1

Analyse

C	Si	Mn	Cr	Ni	Mo	Nb	Ti	V	Fe	W	Co	Cu	Al	P	S	Nb+Ta
0.1	0.4	0.5	22	57	2					14	4		0.3

Propriétés mécaniques

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	490	785	48	HRc

fiche produit

déclaration de performance

déclaration de conformité

fiche produit

demander un devis

Alloy 230 Tig

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.