Alu-Flux | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Flux for aluminium brazing

classification

EN ISO

18496: FL20

Applications

Alu-Fux is for brazing from Aluminium and Aluminium Alloys with a working range from 350 to 550 °C

Type

Flux for aluminium brazing

Applications

Alu-Fux is for brazing from Aluminium and Aluminium Alloys with a working range from 350 to 550 °C

Propriétés

Usually combined with AlSi12 or AlSi5 filler metal.

Classification

EN ISO

18496: FL20

Convient pour

Brazing for Aluminium and Aluminium Alloys with a working range from 350 to 550 °C. Usually combined with AlSi12 or AlSi5 filler metal.

Etuvage

Not required

fiche produit

déclaration de performance

déclaration de conformité

FDS

Alu-Flux NAmm
Packaging	KG/unit	EanCode
Jar	0,25	8720663423016

fiche produit

demander un devis

FDS

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.