NiCrBSi 4 Tig (Colmonoy 4) | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Nickel based Tig filler metal for hardfacing and overlay applications.

classification

AWS

A 5.21: ERNiCr-A

Applications

NiCrBSi 4 TIG offers outstanding metallurgical and physical properties making them ideally suited to solving wear mechanisms such as abrasion, erosion, corrosion and high-temperatures encountered in service.

Type

Nickel based Tig filler metal for hardfacing and overlay applications.

Applications

NiCrBSi 4 TIG offers outstanding metallurgical and physical properties making them ideally suited to solving wear mechanisms such as abrasion, erosion, corrosion and high-temperatures encountered in service.

Propriétés

This nickel based alloy offers superior wear protection, retaining its hardness up to 600ºC (1000ºF) with significant resistance to oxidation.

Classification

AWS

A 5.21: ERNiCr-A

Convient pour

UNS N99644, DELORO 40 Alloy, Colmonoy 4

Aircraft gas turbines, steam turbine powerplants, turbochargers and valves in reciprocating engines, prosthetic devices, heat treating equipment, pollution control equipment, coal gasification and liquefaction systems, and components in pulp and paper mills.

Positions de soudage

Etuvage

Not required

Gas acc. EN ISO 14175

I1

Analyse

C	Ni	Cr	B	Si	Fe
0.4	Rem.	10	2.4	2.1	2.8

Propriétés mécaniques

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				40 HRc

fiche produit

déclaration de performance

déclaration de conformité

FDS

fiche produit

demander un devis

FDS

NiCrBSi 4 Tig

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.