VAUTID Ultra II

Merk
VAUTID
Ceweld product
Type
NiCrBSi based SMAW electrode filled with tungsten carbides for extreme wear resistant overlays.
classification
EN ISO
14700: E Ni20
Toepassingen
The main applications are Hardfacing and rebuilding of stabilizers and other oilfield tools where maximum protection is required. Also for augers, impellers, mixer plates in the brick and clay industry and on decanter screws in the food and chemical industry where corrosion resistance is needed. CEWELD E DUR RU (Ni) can be applied on all sorts of steels except on cast iron or Mn-steel. This alloy is the most wear resistant type in most Hardfacing applications. In case of very fine dust abrasion It might happen that the matrix will be washed out and looses the imbedded Tungsten carbides, in this case another Hardfacing product should be considered..
Type
NiCrBSi based SMAW electrode filled with tungsten carbides for extreme wear resistant overlays.
Toepassingen
The main applications are Hardfacing and rebuilding of stabilizers and other oilfield tools where maximum protection is required. Also for augers, impellers, mixer plates in the brick and clay industry and on decanter screws in the food and chemical industry where corrosion resistance is needed. CEWELD E DUR RU (Ni) can be applied on all sorts of steels except on cast iron or Mn-steel. This alloy is the most wear resistant type in most Hardfacing applications. In case of very fine dust abrasion It might happen that the matrix will be washed out and looses the imbedded Tungsten carbides, in this case another Hardfacing product should be considered..
Eigenschappen

E DUR RU(Ni) is a coated flux-cored tube for electric welding, a newly designed hard-surfacing product consisting of crushed tungsten carbide and a Ni-based alloy. Crushed cast carbide will guaranty a long life. Furthermore the Ni-based alloy provides an excellent corrosion resistance. E DUR RU (Ni) has excellent welding and wetting characteristics at very low currents. It is easy to use and inexperienced welders will have no difficulties to produce smooth deposits mainly without cracks. Multi-layer deposits are possible and worn parts can be rebuild without removing the old material. E DUR RU (Ni) can be applied on all sorts of steels except on cast iron or Mn-steel.

Classification
EN ISO
14700: E Ni20
Geschikt voor

Scratchers, Mixers, Deep drilling, Bentonit mixers, Cement mixers, Stabilisers, Impellers, Augers etc.

Lasposities
PA
Herdrogen
Not required
Ni-matrix: ± 480-520 HV, WSC (carbides) ± 2350 HV
Analyse
C Mn Cr Ni Mo Nb V Fe W Co Cu Al Si Ti B N WSC
65
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 43 HRc
As Welded 2400 HV
Product sheet
MSDS
product sheet
Ask quotation
MSDS