Al 99,5 Ti Tig | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Pure aluminum filler metal for Tig welding

classification

AWS

A 5.10: ER1450

EN ISO

18273: S Al 1450 (Al99,5Ti)

Toepassingen

Aluminium wire for welding mostly pure aluminium (maximum 0,5% of alloyed elements). Applications in chemistry, electronics, construction and food industries.

Type

Pure aluminum filler metal for Tig welding

Toepassingen

Aluminium wire for welding mostly pure aluminium (maximum 0,5% of alloyed elements). Applications in chemistry, electronics, construction and food industries.

Eigenschappen

This pure aluminum filler metal offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding

Classificatie

AWS

A 5.10: ER1450

EN ISO

18273: S Al 1450 (Al99,5Ti)

F-nr

21

Geschikt voor

Cast aluminium special repairs, Al99,0 Al.99,5 Al.99,7 E-Al

Goedkeuringen

CE

Lasposities

Herdrogen

Not required

Gas acc. EN ISO 14175

I1, I3

Analyse

Si	Mn	Cr	Ti	Fe	Cu	Zn	Al	Mg	Zr	Be	Ga+V	Si+Fe	V
0.2	0.02		0.15	0.2	0.02	0.03	99.6

Mechanische waarden

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded	30	80	40	HRc

productblad

prestatieverklaring

VIB

productblad

VIB

Al 99,5 Ti Tig welding wire

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.