Type
Metal spray wires
classification
EN ISO
14919: 6.4
Toepassingen
SP 80/20 NiCr is widely used as a bond coat for subsequent thermal spray layers and as a one step build up material for dimensional restoration. Excellently suitable as a buffer layer before finishing with ceramic layers.
Type
Metal spray wires
Toepassingen
SP 80/20 NiCr is widely used as a bond coat for subsequent thermal spray layers and as a one step build up material for dimensional restoration. Excellently suitable as a buffer layer before finishing with ceramic layers.
Eigenschappen

CEWELD SP 80/20 NiCr is a nickel-chromium electrical-resistance alloy for use at operating temperatures up to (2100 °F) 1150 °C. It contains rare-earth additions for increased oxidation resistance, especially under conditions of frequent switching or wide temperature fluctuations. The alloy has a low temperature coefficient of resistance, making it suitable for control resistors. Used for heating elements in domestic appliances and industrial equipment.

Classificatie
EN ISO
14919: 6.4
Geschikt voor

NiCr metal spray wire for heat resistant coatings with excellent bonding strength.

Lasposities
PC
Herdrogen
Not required
Gas acc. EN ISO 14175
None
Analyse
Si Mn Cr Ti Fe B Cu Zn Sn Al Mg C S P Pb Ni Mo Nb W As
0.2 1 20 0.1 0.1 Rem.
Mechanische waarden
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 90 HRc
productblad
conformiteitsverklaring
productblad
vraag offerte