FILEUR Ni SW 6625

Brand
FILEUR
Ceweld product
Type
Mig welding wire for Inconel 625
classification
AWS
A 5.14: ERNiCrMo-3
EN ISO
18274: S Ni 6625 (NiCr22Mo9Nb)
W.Nr.
2.4831
Applications

CEWELD® NiCro 625 is developed for welding and cladding nickel-based alloys such as alloy 625 or similar materials. This alloy can also be used for welding dissimilar nickel-based alloys to each other, to alloyed steels or to stainless steels and for joining 6% molybdenum super austenitic steels. Alloy 625 is most commonly used in the chemical processing industry, pollution control equipment, marine equipment, nuclear reactor components, pump shafts. Also used in the aerospace industry for thrust reverser assemblies, fuel nozzles, after-burners and combustion systems.

Type
Mig welding wire for Inconel 625
Applications

CEWELD® NiCro 625 is developed for welding and cladding nickel-based alloys such as alloy 625 or similar materials. This alloy can also be used for welding dissimilar nickel-based alloys to each other, to alloyed steels or to stainless steels and for joining 6% molybdenum super austenitic steels. Alloy 625 is most commonly used in the chemical processing industry, pollution control equipment, marine equipment, nuclear reactor components, pump shafts. Also used in the aerospace industry for thrust reverser assemblies, fuel nozzles, after-burners and combustion systems.

Properties

CEWELD® Nicro 625 is a solid drawn wire that is cleaned in a very special way to obtain cleaner and higher quality welds, especially when used for the Hotwire Tig process intermediate cleaning between the layers can be skipped and results in a bright seam with excellent ductility.  The cast and helix of this wire are kept above the EN standards to offer excellent wire feeding and a wire that comes straight out of the torch.

Classification
AWS
A 5.14: ERNiCrMo-3
EN ISO
18274: S Ni 6625 (NiCr22Mo9Nb)
F-nr
43
FM
6
W.Nr.
2.4831
Suitable for

Ni 6625 / NiCr22Mo9Nb / 2.4831

W.Nr: 1.4529, 1.4539, 1.4547, 1.4876, 1.4958, 1.5656, 2.4660, 2.4816, 2.4856, 2.4858, 

 X1CrNiMoCuN20-18-7 - X10NiCrAlTi32-20 - X5NiCrAITi31-20 - NiCr15Fe - NiCr22Mo9Nb - NiCr21Mo - X1NiCrMoCuN25 20 6 - X1NiCrMoCuN25 20 5 - NiCr21Mo - 8XNi9

ASTM: A 533 Gr1

UNS: S31254 - N08800 - N08810 - N06600 - N06625 - N08825 - N08926 - N08020

Alloy 254 SMO - Alloy 800 - Alloy 800H - Alloy 600 - Alloy 625 - Alloy 825 - Sanicro 28 - AL6XN

Approvals
TÜV: 12400.0
Welding positions
PA
PB
PC
PD
PE
PF
Redrying
Not required
Gas acc. EN ISO 14175
I1
Analysis
C Si Mn Cr Ni Mo Nb Ti V Fe W Co Cu Al P S Nb+Ta
0.08 0.4 0.4 21 63 9 3.8 3 3.8
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
-20°C -196°C
As Welded 460 750 32 110 70 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS