Haynes M413

Brand
Haynes International
Ceweld product
Type
Tig welding wire for CuNi30Fe 2.0837
classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
W.Nr.
2.0837
Applications

This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.

Type
Tig welding wire for CuNi30Fe 2.0837
Applications

This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.

Properties

Sound, pore free deposits on ferrous and non-ferrous base materials offering excellent resistance to corrosion in sea water.

Classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
F-nr
34
W.Nr.
2.0837
Suitable for

(Monel 67): Wrought and cast alloys of 70-30, 80-20 and 90-10 copper nickel alloys, Monel 450, (alloy 450),  Nickel 200, CuNi10Fe, CuNi20Fe (2.0878), CuNi30Fe (2.0882), 2.0872 - CuNi 10 Fe 1 Mn (CuNi 10 Fe),

Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
Si Mn P Ti Fe Pb Cu+Ag Ni+Co S Other
0.2 0.5 0.01 0.4 0.6 0.01 Rem. 31 0.01
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 200 420 36 200 115 HB
Product sheet
MSDS
product sheet
Ask quotation
MSDS
Type
Copper-Nickel alloyed Mig / Tig welding wire.
classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
W.Nr.
2.0837
Applications

This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar-welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.

Type
Copper-Nickel alloyed Mig / Tig welding wire.
Applications

This Copper-Nickel weld metal is widely used for marine and desalination applications. Dissimilar-welding applications for this alloy are joints between Monel alloys or Nickel 200 and Copper-Nickel alloys. Often used for surfacing on steel by using Ceweld NiTi-3 as a barrier layer. Shipbuilding, seawater evaporation plants, tubes, pump building, offshore, desalting equipment and parts etc.

Properties

Sound, pore free deposits on ferrous and non-ferrous base materials offering excellent resistance to corrosion in sea water. 

Classification
AWS
A 5.7: ERCuNi
EN ISO
24373: Cu 7158 / CuNi30Mn1FeTi
F-nr
34
W.Nr.
2.0837
Suitable for

(Monel 67): Wrought and cast alloys of 70-30, 80-20 and 90-10 copper nickel alloys, Monel 450, (alloy 450),  Nickel 200, CuNi10Fe, CuNi20Fe (2.0878), CuNi30Fe (2.0882), 2.0872 - CuNi 10 Fe 1 Mn (CuNi 10 Fe),

Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
Si Mn P Ti Fe Pb Cu+Ag Ni+Co S Other
0.2 0.5 0.01 0.35 0.55 0.01 Rem. 30.5 0.01
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 200 420 36 200 115 HB
Product sheet
MSDS
product sheet
Ask quotation
MSDS