LNS NiCrMo 60/16

Brand
Lincoln Electric
Ceweld product
Type
Solid wire for nickel-chromium-molybdenum alloys
classification
AWS
A 5.14: ERNiCrMo-4
EN ISO
18274: S Ni 6276 (NiCr15Mo16Fe6W4)
W.Nr.
2.4886
Applications

CEWELD SA Alloy C-276 is used for welding low carbon nickel-chromium-molybdenum alloys, especially UNS N10276, for welding the clad side in steel clad with low carbon nickel-chromium-molybdenum alloy, and for welding low carbon nickel-chromium-molybdenum alloys to steel and other nickel-base alloys.

Type
Solid wire for nickel-chromium-molybdenum alloys
Applications

CEWELD SA Alloy C-276 is used for welding low carbon nickel-chromium-molybdenum alloys, especially UNS N10276, for welding the clad side in steel clad with low carbon nickel-chromium-molybdenum alloy, and for welding low carbon nickel-chromium-molybdenum alloys to steel and other nickel-base alloys.

Properties

High Nickel-Chromium alloy with very good mechanical properties down to -196°C. This wire can be welded with our fused flux FL 880 or agglomerated flux FL 838 or FL 839.

Classification
AWS
A 5.14: ERNiCrMo-4
EN ISO
18274: S Ni 6276 (NiCr15Mo16Fe6W4)
F-nr
45
FM
6
W.Nr.
2.4886
Suitable for

Alloy 276, Ni 6276 (NiCr15Mo16Fe6W4). 2.4886, 2.4887

M.No: 1.5680, 1.5682, 2.4819, 2.4883

NiMo16Cr15W, X12Ni5 / 12Ni19, X8Ni9,  G-NiMo16Cr

Alloy C4, Hastelloy C276, A494CW-12MW, A743 / A744CW-12M

Welding positions
PA
PB
Redrying
Not required
Analysis
C Si Mn Cr Ni Mo Nb Ti V Fe W Co Cu Al P S Nb+Ta
0.01 0.07 0.9 15.5 62 16 0.2 6 4 2
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 410 710 35 80 HRc
Product sheet
MSDS
product sheet
Ask quotation
MSDS