Selectarc Al112
CEWELD® E AlSi 12 is for joining aluminum alloyed with copper, silicon, and magnesium.
Also excellent for joining dissimilar grades of aluminum.
For welding broken gear parts and or other casting parts, also ideal for cladding or rebuilding wornout parts, Engine blocks, cylinder heads, tanks, containers, frames, lorry tipper.
CEWELD® E AlSi 12 is for joining aluminum alloyed with copper, silicon, and magnesium.
Also excellent for joining dissimilar grades of aluminum.
For welding broken gear parts and or other casting parts, also ideal for cladding or rebuilding wornout parts, Engine blocks, cylinder heads, tanks, containers, frames, lorry tipper.
CEWELD® E AlSi 12 have a very good weldability with good penetration and porosity free deposit, Unique self lifting slag and improved coating against moisture pick up. Start by using the upper portion of the amperage range. Feed the electrode quickly and move fast maintaining a very close arc gap.
Al 4047A (AlSi12)
Cast Aluminium with more than 7% Silicium,
Mat.n: 3.2211, 3.2315, 3.2371, 3.2373, 3.2381, 3.2383, 3.2581, 3.2583, 3.3206,
G-AlSi12, G-AlSi12(Cu), G-AlSi10Mg, G-AlSi10Mg(Cu), G-AlSi9Mg, AlMg1SiCu, AlMg0,5Si, AlMgSi1, G-AlSi5Mg
Iso. n: 6061, 6063, 6082
EN AC-42100 [AlSi7Mg0.3], EN AC-43000 [AlSi10Mg(A)], EN AC-43200 [AlSi10Mg(Cu)], EN AC-43300 [AlSi9Mg], EN AC-44000 [AlSi11], EN AC-44200 [AlSi12(A)], EN AC-47000 [AlSi12(Cu)]
| Heat Treatment |
RP0,2 (MPa) |
Rm (MPa) |
A5 (%) |
Hardness |
|---|---|---|---|---|
| As Welded | 150 | 250 | 14 | HRc |