SELECTARC CUNI10

Brand
Selectarc
Ceweld product
Type
Copper-Nickel welding wire for marine applications
classification
EN ISO
24373: Cu 7061 / CuNi10
W.Nr.
2.0873
Applications

CEWELD® CuNi10Fe is suitable for welding and cladding CuNi-Materials of EN ISO 17664 and seawater resistant CuZn Alloys of EN ISO 17660. And also suitable for surfacing on low alloyed and unalloyed steels and grey cast iron.

Type
Copper-Nickel welding wire for marine applications
Applications

CEWELD® CuNi10Fe is suitable for welding and cladding CuNi-Materials of EN ISO 17664 and seawater resistant CuZn Alloys of EN ISO 17660. And also suitable for surfacing on low alloyed and unalloyed steels and grey cast iron.

Properties

Seawater resistant

Classification
EN ISO
24373: Cu 7061 / CuNi10
F-nr
37
W.Nr.
2.0873
Suitable for

Cunifer 10, cuni10fe, seawater resistant, marine applications, tubes, pump building, offshore etc.

Welding positions
PA
PB
PC
PD
PE
PF
PG
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
C Si Mn P S Ti Fe Cu Zn Pb Sn Al As Ni+Co
0.02 0.1 1 0.01 0.01 0.4 1.5 89 0.01 10
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Impact Energy (J) ISO-V Hardness
RT
As Welded 300 34 190 80 HB
Product sheet
MSDS
product sheet
Ask quotation
MSDS