Type
High alloyed fluxcored wire for hardfacing against extreme abrasion.
classification
EN ISO
14700: T Fe16
Applications

Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear

Type
High alloyed fluxcored wire for hardfacing against extreme abrasion.
Applications

Rebuilding wornout parts or protecting new machine parts to increase life that suffer from extreme abrasive wear

Properties

High C-Cr-Nb, B-alloyed flux-cored wire electrode which forms extremely hard complex carbides for extremely wear resistant deposits on parts subject to excessively heavy abrasive wear weldable under mixed gas. Extreme good wear resistance due to excelent first layer hardness properties. More than 1 or 2 layers should not be deposited. A Buffer layer with OA 4370 or OA MnCr is recommended in case of old layers or critical base metals..

Classification
EN ISO
14700: T Fe16
Suitable for

64-68 HRc Hardfacing wire used in mining, agriculture and steel mills, conveyor chains, agriculture, construction, mixer blades, paddles, cement pumps with excelent abrasion and wear resistance against sand and minerals

Welding positions
PA
PB
PC
Redrying
Not required
Gas acc. EN ISO 14175
M21
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
2.5 0.6 2 11.5 5 2
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 66 HRc
Product sheet
declaration of conformity
SDS
Product sheet
Ask quotation
SDS