Type
Copper-Aluminum GMAW composite welding wire for cladding applications.
classification
EN ISO
14700: T Cu1
Applications

Cladding components undergoing metal to metal wear with high friction and or heavy surface loads on top of cast iron, steels and or bronzes. Deep drawing dies for stainless steel, aluminium, magnesium and titanium parts. Sleeves, spindles, cable winches guides, gliding surfaces, pulling equipment. (usualy preheating 300°C prior to welding is recomended to reduce cracks)

Type
Copper-Aluminum GMAW composite welding wire for cladding applications.
Applications

Cladding components undergoing metal to metal wear with high friction and or heavy surface loads on top of cast iron, steels and or bronzes. Deep drawing dies for stainless steel, aluminium, magnesium and titanium parts. Sleeves, spindles, cable winches guides, gliding surfaces, pulling equipment. (usualy preheating 300°C prior to welding is recomended to reduce cracks)

Properties

•       Special alloyed copper composite wire suitable for the Mig process•       The weld metal is a Cu-Al bronze with extreme high aluminium content.•       Sound, pore free deposits with excelent sliding properties and low friction.

Classification
EN ISO
14700: T Cu1
Suitable for

CuAl14Fe
 

Welding positions
PA
PB
Redrying
Not required
Gas acc. EN ISO 14175
I1, I3
Analysis
C Mn Cr Ni Mo Nb V Fe W Co Cu Al Si Ti B N
0.2 4 Rem. 13.5
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 420 HB
Product sheet
declaration of conformity
SDS
Product sheet
Ask quotation
SDS