Type
Seamless metal cored wire for hardfacing (60 HRc, T Fe2)
classification
EN ISO
14700: T ZFe2
DIN
8555: MSG 6-GF-60 P
Applications

Rebuilding and cladding parts against strong abrasion and heavy impact. Hardfacing alloy against heavy impact and shock, bucket, loaders, crusher jaws, crusher cones, pumps, sand, snow scratchers, stone cutting tools etc.

Type
Seamless metal cored wire for hardfacing (60 HRc, T Fe2)
Applications

Rebuilding and cladding parts against strong abrasion and heavy impact. Hardfacing alloy against heavy impact and shock, bucket, loaders, crusher jaws, crusher cones, pumps, sand, snow scratchers, stone cutting tools etc.

Properties

Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer except on materials considered critical. In this situation CEWELD AA M690 is recommended. Suited for wear parts subject to heavy impact and shock. The interpass temperature should be maximum 250ºC. The weld metal is machinable by special carbide tools, hardening is possible. The maximum hardness is dependent on the base metal and is achieved in the first layer.

Classification
EN ISO
14700: T ZFe2
DIN
8555: MSG 6-GF-60 P
Suitable for

55-62 HRc, T Fe2

 

Welding positions
PA
PB
PC
PF
Redrying
Not required
Gas acc. EN ISO 14175
M21
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
0.5 1.2 1.5 6 0.9
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 60 HRc
Product sheet
declaration of conformity
SDS
Product sheet
Ask quotation
SDS