SP ZnAl | Certilas: The filler metal specialist

Go Back

PRODUCT SPECIFICATIONS
PACKAGING
Ask quotation

Type

Solid metal spray wire

classification

EN ISO

14919: 2.3 (ZnAl)

Applications

In case high corrosion resistance is required

Type

Solid metal spray wire

Applications

In case high corrosion resistance is required

Properties

High corrosion resistance

Classification

EN ISO

14919: 2.3 (ZnAl)

Suitable for

Metal spray wire for so called Scooping in case high corrosion resistance is required. Bridges, outdoor steel furniture, monopiles, wind mills.

Welding positions

Redrying

Not required

Analysis

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	Fe	W	B	Cu	Zn	Pb	Sn	Al	Mg	As
														85			15

Product sheet

declaration of performance

declaration of conformity

Product sheet

Ask quotation

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.