SP ZnAl | Certilas: The filler metal specialist

Go Back

Produktspezifikationen
Verpackung
Bitte um Angebot

Type

Solid metal spray wire

classification

EN ISO

14919: 2.3 (ZnAl)

Anwendungen

In case high corrosion resistance is required

Type

Solid metal spray wire

Anwendungen

In case high corrosion resistance is required

Eigenschaften

High corrosion resistance

Klassifikation

EN ISO

14919: 2.3 (ZnAl)

Geeignet für

Metal spray wire for so called Scooping in case high corrosion resistance is required. Bridges, outdoor steel furniture, monopiles, wind mills.

Schweißpositionen

Rücktrocknung

Not required

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	Fe	W	B	Cu	Zn	Pb	Sn	Al	Mg	As
														85			15

Produktblatt

Leistungserklärung

Konformitätserklärung

Produktblatt

Bitte um Angebot

Haftungsausschluss

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.